Pellet Stove Installation in Boerne, TX
A pellet stove is only as safe as its clearances and vent run, and both are dictated by the listing. We set a rated hearth pad, run 3" or 4" PL vent pitched and terminated to code, fit the outside-air kit, and wire the electrical — Harman, Quadra-Fire, Englander, and all major brands. Clearances to combustibles are measured and held, and the draft is verified at start-up, so the install is confirmed to the listing before the stove is handed over. Serving Boerne (3 ZIP codes, 20k residents) and surrounding neighborhoods with same-week scheduling.
Pellet Stove Installation in Boerne
Pellet stove installation places a NEW pellet-burning stove or insert and builds everything it needs to run safely: listed PL-rated venting, code clearances, a non-combustible hearth pad, a dedicated electrical circuit, and a commissioned first burn verified on instruments. It's a build-it-once job — distinct from repair, which services a stove already in place and faulting.
Local dossier · Boerne, TX
Boerne was settled by Germans who squared Hill Country limestone by hand, and the town still holds work from that first generation — thick stone walls, lime-bedded joints, chimneys built like the mason expected his grandchildren to check on them. Out here the enemy is mostly heat: caliche-dry summers that swing thirty degrees overnight, expanding mortar all afternoon and contracting it by dawn. That daily cycle, more than rain, is what opens joints in Hill Country stone. The newer side of Boerne is different work — stone veneer over wood framing, factory flues, thin stone glued where thick stone used to stack — and it needs caps, chase covers, and flashing more than it needs a trowel. We handle both, and we don't confuse them. On the old stock, the craft question is matching: new limestone against 150 years of patina, fresh lime mortar against joints that have weathered since Reconstruction. We'll be straight with you — no stone patch matches on day one. Anyone promising invisible stonework the afternoon they leave is selling something. We cut the stone right, match the mortar's strength and sand, tool the joint to the original profile, and let the weather finish the blend the way it always has. That's how Boerne's masonry got old in the first place.
Kendall County Courthouse
Why this matters in Boerne
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates — so the inspection documents period masonry repointing and clay-liner condition, large custom-home fireplace status, and rural spark-arrestor compliance. That local stock is exactly why our Boerne crews tailor pellet stove installation to the homes here — not a generic checklist.
Common signs in Boerne homes
- Adding efficient, thermostatically-controlled heat
- Converting an open masonry firebox to a pellet insert
- No dedicated outlet near the planned stove location
- New construction or addition that needs a heat source
Pellet Stove Installation in Boerne (Kendall County) — what's local
Boerne sits in Kendall County (county seat: Boerne). Affluent Kendall County sets historic Boerne masonry beside large custom-home fireplaces and rural spark-arrestor work. We grade each system before certifying it safe to burn. For pellet stove installation that means our Boerne crew sizes up the local housing stock before quoting — and follows Kendall County permit requirements for any work that needs an inspection sign-off.
Climate & code file · Greater San Antonio
San Antonio is a dozen chimney markets stacked in one city, and the only thing that holds them to one standard is the inspection. A century-old King William Victorian stack, a 1970s ranch firebox off Loop 410, and a 2015 Stone Oak prefab are three different systems with three different failure modes — so each gets the same diagnostic protocol and its own documented condition rating, not a one-size quote. What makes the metro specific is light annual burn and long idle seasons: a handful of fires across a short, mild winter, then nine months unused, which is exactly when undetected damage compounds.
The rare hard freeze on porous stone
A Feb-2021-class freeze is the limestone killer: water already sitting inside porous stone expands and pops the face, and a Level 2 scan exists to catch the cracked tile and open joints it leaves. The defense is verification before the cold — confirm the stone is dry and sound, then seal it with a vapor-permeable siloxane repellent, never a film-forming coating that traps moisture inside and accelerates the spalling at the next freeze.
Limestone & lime mortar — the one that matters most
Before any repointing on older Boerne masonry, the inspection identifies the original mortar — because soft limestone laid in a breathable high-lime mix can't be patched with hard gray Portland without driving the cracking into the stone face. The Portland is harder than the stone, transfers stress into it, and converts a repointing job into a stone-replacement job. We test and color-match the existing mix on record so the repair moves with the wall through every heat-and-freeze cycle.
Cedar (Ashe juniper)
In Boerne the cedar load is a documented fire-safety variable: Ashe-juniper needles and December–February pollen pack spark screens and crown washes, and a clogged cap is logged as both a draft fault and a fire-screen breach. The cap is cleared and inspected every sweep. On wood-burners the report sets the sweep interval to cedar's hot, resin-heavy burn — it glazes a flue far faster than seasoned oak — instead of defaulting to a calendar.
Long dormancy
Nine idle months, then a hard six-week burn, is enough time for a Boerne flue to take on a nest, collect debris, and hide a hairline crown crack the homeowner never sees. The pre-season sweep-and-scan exists to verify all three are clear and documented, so the first cold-front fire lands on a flue confirmed safe and code-ready rather than assumed to be.
Code note · Greater San Antonio
South-Texas / Hill-Country code reality the inspection is held to: porous historic stone is sealed only with a vapor-permeable siloxane repellent — never a film-forming coating — and the cracked-tile and open-joint damage a Feb-2021-class freeze leaves is exactly what a documented Level 2 scan is run to find and rate.
Built to code · Pellet Stove Installation in Boerne
Pellet Stove Installation is held to published national standards no matter the city. Our Boerne crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Kendall County's authority on every job.
- Listed PL-vent (UL 641) — Positive-pressure exhaust is the reason pellet venting is unforgiving. It demands the sealed, listed PL-vent pellet pipe with gasketed joints, sized within the manufacturer's allowable equivalent length; bare stovepipe or an unlined masonry flue never qualifies.
- Clearances to combustibles per listing — Clearances to combustibles come straight off the stove's UL label, and we hold them exactly. Where the room is tight, the only legal reduction is a listed heat shield mounted on ceramic standoffs.
- Manufacturer instructions govern (NFPA 211) — Two documents rule this install, NFPA 211 and the appliance's listed installation instructions, with the manufacturer's listed clearances and vent limits always taking precedence.
- Commissioned + CO check — Before we sign off, the stove gets a full light-off and must prove it draws under positive pressure, and the commissioned unit passes an ambient CO check.
Every pellet stove installation in Boerne
Deliverables
- Full sweep + inspection
- Soot containment + HEPA vacuum
- Level 1 visual inspection report
- Photos of any code issues
- Recommendations + written quote
- Drop cloths + clean cleanup
How a job runs
Plan
Confirm clearances, vent route, and a power source.
Power + Vent
Pull the dedicated circuit and assemble a sealed PL vent with correct pitch and termination.
Set
Set the stove or insert on its correctly sized hearth pad and connect it.
Commission
Light it off, tune feed and air to the pellet, run a CO check, and demonstrate operation.
4+ neighborhoods in Boerne
Same-week service across every neighborhood in Boerne. Don't see yours? Call (214) 444-8103 — if it's in Boerne, we cover it.
The Boerne advantage.
Our Boerne crew lives in the metro they serve, across Kendall County. They know which Boerne neighborhoods — Hill Country Village, Esperanza, Cordillera Ranch and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every pellet stove installation.
More services in Boerne
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Pellet Stove Installation in nearby Kendall cities
We cover pellet stove installation across Kendall County — same crew, same warranty. Nearby Boerne cities we also serve:
Pellet Stove Installation in Boerne — FAQ
What does a code-compliant new pellet stove installation include?
Five elements make the install code-compliant: a dedicated grounded 120V circuit for the unit, listed clearances to combustibles taken from the stove's own label, an approved PL-vent, often run horizontal through-wall with a short vertical rise, a non-combustible floor pad, and a commissioned light-off finished with a final draft and CO check. Two documents govern the work, the manufacturer instructions and NFPA 211, and the listed clearances and vent limits always take precedence.
Why does a new pellet stove require its own dedicated electrical circuit?
Everything that makes a pellet stove burn runs on electricity: the auger, the igniter, the combustion blower, and the convection fan. That also means the stove sits idle through a power outage unless it has a battery backup. Rather than hang it off a shared outlet or an extension cord, we run a dedicated grounded circuit as part of the install; code requires it and reliability demands it.
Can a new pellet insert be fitted into my existing masonry fireplace?
Commonly done, and yes. The requirement is a listed pellet vent or stainless liner running up the flue; discharging into bare masonry is never acceptable, because pellet exhaust runs cooler and under positive pressure, so it would condense and leak out through mortar joints. Per our standard method, the chimney is inspected first and any liner the flue needs appears in the quote, not as a surprise later.
How long does a new installation take, and will a permit be needed?
Plan on most of a day for a standard through-wall vented stove where a circuit is already available; an insert that needs a liner, an outside-air kit, or a new circuit stretches longer. On paperwork, a new solid-fuel appliance triggers a permit and final inspection in most jurisdictions, and that documentation is exactly what your homeowner's insurance will lean on if a claim ever comes.
Can you match new limestone to the weathered stone on my older Boerne house?
We can match the stone's bed, color range, and cut, and we match the mortar's strength, sand, and joint tooling. What nobody can rush is patina — weathered limestone earns its color over decades of sun and rain. A proper patch starts close and blends within a few seasons. We'll show you photos of our older repairs so you can see how the blend actually ages.
Do Hill Country chimneys really need freeze protection?
Yes, in a Hill Country way. Boerne only gets a few hard freezes a year, but they usually land on masonry that's been baked and micro-cracked all summer, and they tend to arrive wet. Water sitting in an open joint that freezes overnight does more damage here than a month of steady northern cold. Sound joints and a crowned, capped top handle it. That's the whole game.
My new build has a stone chimney — does it need masonry maintenance?
Check what's under the stone first. Most new Boerne builds are thin stone veneer over a framed chase with a factory flue, so there's no structural masonry to point. What those need is a fitted chase cover, a solid cap, and regular flashing checks, because water ruins them faster than anything else. If you've got true full-bed stone, that's a different story, and we treat it like one.
Do you serve all of Boerne?
Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.
How soon can you schedule pellet stove installation in Boerne?
We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Boerne homes need pellet stove installation?
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates — so the inspection documents period masonry repointing and clay-liner condition, large custom-home fireplace status, and rural spark-arrestor compliance. Pellet Stove Installation is part of keeping that local housing stock safe, efficient, and up to code.
How much does pellet stove installation cost in Boerne, TX?
Pellet Stove Installation in Boerne starts from $1,650, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (214) 444-8103 for a free, no-pressure Boerne quote.
Do you offer emergency or same-day pellet stove installation in Boerne?
Yes — we run same-week and emergency pellet stove installation across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (214) 444-8103 and we prioritize Boerne dispatch so a craftsman is on it fast.
Is there a CSIA-certified pellet stove installation company near me in Boerne?
Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local pellet stove installation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (214) 444-8103.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line