Chimney Liner in Boerne, TX
A cracked, gapped, or missing liner is a fire-path defect — heat and combustion gases reach the wood framing around the flue. We confirm it on a CCTV scan first so the diagnosis is documented, then reline with a UL-1777-listed stainless system sized to the appliance and fuel, holding NFPA 211 clearances the whole run. After install we re-scan the liner end to end so the corrected flue is verified on camera, not assumed. Serving Boerne (3 ZIP codes, 20k residents) and surrounding neighborhoods with same-week scheduling.
Chimney Liner in Boerne
Relining replaces a flue liner that a camera scan has already confirmed failed — cracked or spalled clay tile, open joints, post-fire breaches — with a new full-length liner sized to your appliance. It is a diagnosed teardown-and-replace, not a precaution: the channel exists but no longer contains heat and combustion gases safely. The replacement is a UL-1777 listed liner, alloy matched to the fuel, sized to the NFPA 211 venting tables, then proof-tested and documented for your permit, insurer, or post-fire claim.
Local dossier · Boerne, TX
Boerne was settled by Germans who squared Hill Country limestone by hand, and the town still holds work from that first generation — thick stone walls, lime-bedded joints, chimneys built like the mason expected his grandchildren to check on them. Out here the enemy is mostly heat: caliche-dry summers that swing thirty degrees overnight, expanding mortar all afternoon and contracting it by dawn. That daily cycle, more than rain, is what opens joints in Hill Country stone. The newer side of Boerne is different work — stone veneer over wood framing, factory flues, thin stone glued where thick stone used to stack — and it needs caps, chase covers, and flashing more than it needs a trowel. We handle both, and we don't confuse them. On the old stock, the craft question is matching: new limestone against 150 years of patina, fresh lime mortar against joints that have weathered since Reconstruction. We'll be straight with you — no stone patch matches on day one. Anyone promising invisible stonework the afternoon they leave is selling something. We cut the stone right, match the mortar's strength and sand, tool the joint to the original profile, and let the weather finish the blend the way it always has. That's how Boerne's masonry got old in the first place.
Kendall County Courthouse
Why this matters in Boerne
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates — so the inspection documents period masonry repointing and clay-liner condition, large custom-home fireplace status, and rural spark-arrestor compliance. That local stock is exactly why our Boerne crews tailor chimney liner to the homes here — not a generic checklist.
Common signs in Boerne homes
- Fragments of cracked flue tile or loose mortar landing in the firebox
- Camera footage that shows a tile liner cracked, spalled, or gapped at the joints
- A recent chimney fire, where heat-checked tile typically points to a reline
- Creosote returning unusually fast, signaling a breached liner
Chimney Liner in Boerne (Kendall County) — what's local
Boerne sits in Kendall County (county seat: Boerne). Affluent Kendall County sets historic Boerne masonry beside large custom-home fireplaces and rural spark-arrestor work. We grade each system before certifying it safe to burn. For chimney liner that means our Boerne crew sizes up the local housing stock before quoting — and follows Kendall County permit requirements for any work that needs an inspection sign-off.
Climate & code file · Greater San Antonio
San Antonio is a dozen chimney markets stacked in one city, and the only thing that holds them to one standard is the inspection. A century-old King William Victorian stack, a 1970s ranch firebox off Loop 410, and a 2015 Stone Oak prefab are three different systems with three different failure modes — so each gets the same diagnostic protocol and its own documented condition rating, not a one-size quote. What makes the metro specific is light annual burn and long idle seasons: a handful of fires across a short, mild winter, then nine months unused, which is exactly when undetected damage compounds.
The rare hard freeze on porous stone
A Feb-2021-class freeze is the limestone killer: water already sitting inside porous stone expands and pops the face, and a Level 2 scan exists to catch the cracked tile and open joints it leaves. The defense is verification before the cold — confirm the stone is dry and sound, then seal it with a vapor-permeable siloxane repellent, never a film-forming coating that traps moisture inside and accelerates the spalling at the next freeze.
Limestone & lime mortar — the one that matters most
Before any repointing on older Boerne masonry, the inspection identifies the original mortar — because soft limestone laid in a breathable high-lime mix can't be patched with hard gray Portland without driving the cracking into the stone face. The Portland is harder than the stone, transfers stress into it, and converts a repointing job into a stone-replacement job. We test and color-match the existing mix on record so the repair moves with the wall through every heat-and-freeze cycle.
Cedar (Ashe juniper)
In Boerne the cedar load is a documented fire-safety variable: Ashe-juniper needles and December–February pollen pack spark screens and crown washes, and a clogged cap is logged as both a draft fault and a fire-screen breach. The cap is cleared and inspected every sweep. On wood-burners the report sets the sweep interval to cedar's hot, resin-heavy burn — it glazes a flue far faster than seasoned oak — instead of defaulting to a calendar.
Long dormancy
Nine idle months, then a hard six-week burn, is enough time for a Boerne flue to take on a nest, collect debris, and hide a hairline crown crack the homeowner never sees. The pre-season sweep-and-scan exists to verify all three are clear and documented, so the first cold-front fire lands on a flue confirmed safe and code-ready rather than assumed to be.
Code note · Greater San Antonio
South-Texas / Hill-Country code reality the inspection is held to: porous historic stone is sealed only with a vapor-permeable siloxane repellent — never a film-forming coating — and the cracked-tile and open-joint damage a Feb-2021-class freeze leaves is exactly what a documented Level 2 scan is run to find and rate.
Built to code · Chimney Liner in Boerne
Chimney Liner is held to published national standards no matter the city. Our Boerne crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Kendall County's authority on every job.
- UL-1777 listed liner — Only a UL-1777 listed chimney liner goes in, tested and certified for the application; improvised pipe never does. We record the listing so it stands behind your permit, insurer, or post-fire claim.
- Alloy matched to fuel — Alloy choice follows the fuel: 316Ti covers wood, coal, oil, and high-sulfur fuels, while 304 serves where the fuel allows it. Pick the wrong stainless and the new liner corrodes on the same timeline as the one it replaced.
- Sized per NFPA 211 / appliance listing — Sizing is worked from three inputs, the actual flue dimension, the appliance outlet, and the chimney height, checked against the NFPA 211 venting tables and the appliance listing. Swap a cracked liner for a mis-sized one and the system still fails to vent safely.
- Common venting (NFPA 54) — If two appliances share the relined stack, the replacement gets common-vented per the sizing tables of NFPA 54, the National Fuel Gas Code, so that neither appliance spills combustion products.
- Clearance to combustibles — Insulation is added wherever clearance to combustibles demands it: under the IRC, that means 2 in for an interior masonry chimney and 1 in for an exterior chimney, while a factory-built chimney follows its own listing.
Scoped from a graded inspection
At Texas Chimney Experts, a chimney liner is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the chimney liner is built on.
Chimney inspection in BoerneEvery chimney liner in Boerne
Deliverables
- Full sweep + inspection
- Soot containment + HEPA vacuum
- Level 1 visual inspection report
- Photos of any code issues
- Recommendations + written quote
- Drop cloths + clean cleanup
How a job runs
Level 2 scope
We video-grade the failure mode and confirm the existing liner is beyond repair.
Spec the replacement
We size the new liner to the appliance BTU and flue length, then select the alloy and the method, whether rigid, flexible, or cast-in-place.
Remove & reline
The failed liner is pulled or abandoned, the new one runs full-length, the top plate gets sealed, and insulation is added where required.
Test & sign-off
We run a smoke and pressure test, take a draft reading, and issue UL-1777 and insurance documentation.
4+ neighborhoods in Boerne
Same-week service across every neighborhood in Boerne. Don't see yours? Call (214) 444-8103 — if it's in Boerne, we cover it.
The Boerne advantage.
Our Boerne crew lives in the metro they serve, across Kendall County. They know which Boerne neighborhoods — Hill Country Village, Esperanza, Cordillera Ranch and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every chimney liner.
More services in Boerne
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Chimney Liner in nearby Kendall cities
We cover chimney liner across Kendall County — same crew, same warranty. Nearby Boerne cities we also serve:
Chimney Liner in Boerne — FAQ
How do I know my existing liner has actually failed and needs replacing?
Relining applies only to a liner that has already failed. The tell-tales are flue-tile fragments collecting in the firebox, tiles that scan cracked, spalled, or gapped on camera, creosote that returns unusually fast, and white staining. We run a Level 2 video scope to grade the failure, so we replace a liner that's genuinely compromised and never a sound one.
Isn't relining the same as flue installation?
No, and that's the key distinction. Relining swaps out a liner that already exists but has failed, whether from cracked tile, breached joints, or post-fire damage. Flue installation fits a liner where none ever existed: new construction, an added appliance, or an unlined masonry stack receiving its first liner. So a failed liner calls for a reline; no liner at all is a flue installation.
What kind of replacement liner will you install?
For most wood and gas applications, the standard replacement is a UL 1777 listed stainless liner sized to the specific appliance. Where the masonry around the failed liner is also weak, a cast-in-place poured liner does double duty, lining the flue while re-stiffening the chimney; where the flue runs crooked, a flexible liner is the material of choice. Fuel type, flue geometry, and the condition of the masonry settle it.
What happens if I keep using a chimney with a failed liner?
A cracked or missing liner leaves the surrounding masonry and wood framing exposed to direct heat and combustion gases, driving up both fire and carbon-monoxide risk. NFPA 211 treats a chimney with an unsafe liner as unfit to operate until it's relined, which is why we call a failed scan a stop-burning finding rather than a someday repair.
How long does a reline take, and is removing the old liner extra work?
A clean stainless reline can often be finished in a single day. It takes longer when badly collapsed clay tile has to be pulled out, or when the flue needs other repairs handled first, and how stubborn the failed liner is to remove is one of the things that moves the price. The technician confirms the timeline once the flue has been scoped.
Can you match new limestone to the weathered stone on my older Boerne house?
We can match the stone's bed, color range, and cut, and we match the mortar's strength, sand, and joint tooling. What nobody can rush is patina — weathered limestone earns its color over decades of sun and rain. A proper patch starts close and blends within a few seasons. We'll show you photos of our older repairs so you can see how the blend actually ages.
Do Hill Country chimneys really need freeze protection?
Yes, in a Hill Country way. Boerne only gets a few hard freezes a year, but they usually land on masonry that's been baked and micro-cracked all summer, and they tend to arrive wet. Water sitting in an open joint that freezes overnight does more damage here than a month of steady northern cold. Sound joints and a crowned, capped top handle it. That's the whole game.
My new build has a stone chimney — does it need masonry maintenance?
Check what's under the stone first. Most new Boerne builds are thin stone veneer over a framed chase with a factory flue, so there's no structural masonry to point. What those need is a fitted chase cover, a solid cap, and regular flashing checks, because water ruins them faster than anything else. If you've got true full-bed stone, that's a different story, and we treat it like one.
Do you serve all of Boerne?
Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.
How soon can you schedule chimney liner in Boerne?
We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Boerne homes need chimney liner?
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates — so the inspection documents period masonry repointing and clay-liner condition, large custom-home fireplace status, and rural spark-arrestor compliance. Chimney Liner is part of keeping that local housing stock safe, efficient, and up to code.
How much does chimney liner cost in Boerne, TX?
Chimney Liner in Boerne starts from $2,900, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (214) 444-8103 for a free, no-pressure Boerne quote.
Do you offer emergency or same-day chimney liner in Boerne?
Yes — we run same-week and emergency chimney liner across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (214) 444-8103 and we prioritize Boerne dispatch so a craftsman is on it fast.
Is there a CSIA-certified chimney liner company near me in Boerne?
Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local chimney liner team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (214) 444-8103.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line