Spark Arrestor Installation in Boerne, TX

A spark arrestor is the mesh screen that holds burning embers in, keeping them from escaping the flue and setting the roof or nearby brush alight. A cap is the lid that keeps rain and animals out. The arrestor shields the outside world from the fire within; the cap shields the flue from the weather outside. The two are often combined in a single fitting, which is where the confusion comes from, but the arrestor is specifically the code-sized screen, and we can fit one onto a cap you already own.

No screen over the flue even where a weather cap is present, embers or sparks spotted leaving the chimney top, or an existing arrestor that has rusted through, torn, or sooted solid. A local burn code or an insurer in a fire-prone area can require one as well. Homes near trees, dry brush, or wildfire terrain, and anyone burning wood, stand to gain the most from a functioning screen on every flue.

NFPA 211 requires the screen to be a corrosion-resistant material with openings no smaller than 3/8 inch and no larger than 1/2 inch. The 3/8-inch floor keeps the screen from sooting shut and strangling the draft; the 1/2-inch ceiling keeps embers from getting out. That two-sided limit is what makes an arrestor an engineered fire component rather than a plain cap collar. Some wildfire jurisdictions set stricter rules, so the local requirement controls whenever it's tighter.

Yes — and in these zones the requirement usually runs tighter than the NFPA baseline. Inside a designated fire-hazard or wildland-urban-interface area, one ember that escapes the flue can start a wildfire, which is why local code and a lot of insurers require a compliant arrestor on every solid-fuel flue. Our CSIA-certified techs verify the mesh-and-material rule your jurisdiction enforces, install to that spec, and record the screen size so it's on file for your inspection or insurer.

Embers that clear the flue can drop onto the roof or into nearby brush; over a combustible roof or beside dry vegetation, that's a live ignition point for a roof or wildland fire. The screen is cheap insurance against a costly fire. And an open top with no cap is also letting in the rain and animals a cap is designed to stop, which is why we frequently fit the arrestor and cap together.

Bolt-on and clamp-on screens and arrestor-caps are both available, but the work happens at the flue top on the roof, the mesh has to land inside the code-required size range, and the screen has to seat firmly to the tile or pipe and hold in wind. A screen that's loose or sized wrong fails at the one job it exists for — holding embers in — so we verify both the fit and the mesh size against the code that applies to your property.

We can match the stone's bed, color range, and cut, and we match the mortar's strength, sand, and joint tooling. What nobody can rush is patina — weathered limestone earns its color over decades of sun and rain. A proper patch starts close and blends within a few seasons. We'll show you photos of our older repairs so you can see how the blend actually ages.

Yes, in a Hill Country way. Boerne only gets a few hard freezes a year, but they usually land on masonry that's been baked and micro-cracked all summer, and they tend to arrive wet. Water sitting in an open joint that freezes overnight does more damage here than a month of steady northern cold. Sound joints and a crowned, capped top handle it. That's the whole game.

Check what's under the stone first. Most new Boerne builds are thin stone veneer over a framed chase with a factory flue, so there's no structural masonry to point. What those need is a fitted chase cover, a solid cap, and regular flashing checks, because water ruins them faster than anything else. If you've got true full-bed stone, that's a different story, and we treat it like one.

Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.

We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.

Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates — so the inspection documents period masonry repointing and clay-liner condition, large custom-home fireplace status, and rural spark-arrestor compliance. Spark Arrestor Installation is part of keeping that local housing stock safe, efficient, and up to code.

Spark Arrestor Installation in Boerne starts from $250, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (214) 444-8103 for a free, no-pressure Boerne quote.

Yes — we run same-week and emergency spark arrestor installation across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (214) 444-8103 and we prioritize Boerne dispatch so a craftsman is on it fast.

Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local spark arrestor installation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (214) 444-8103.