Pellet Stove Installation in Arlington, TX

Five elements make the install code-compliant: a dedicated grounded 120V circuit for the unit, listed clearances to combustibles taken from the stove's own label, an approved PL-vent, often run horizontal through-wall with a short vertical rise, a non-combustible floor pad, and a commissioned light-off finished with a final draft and CO check. Two documents govern the work, the manufacturer instructions and NFPA 211, and the listed clearances and vent limits always take precedence.

Everything that makes a pellet stove burn runs on electricity: the auger, the igniter, the combustion blower, and the convection fan. That also means the stove sits idle through a power outage unless it has a battery backup. Rather than hang it off a shared outlet or an extension cord, we run a dedicated grounded circuit as part of the install; code requires it and reliability demands it.

Commonly done, and yes. The requirement is a listed pellet vent or stainless liner running up the flue; discharging into bare masonry is never acceptable, because pellet exhaust runs cooler and under positive pressure, so it would condense and leak out through mortar joints. Per our standard method, the chimney is inspected first and any liner the flue needs appears in the quote, not as a surprise later.

Plan on most of a day for a standard through-wall vented stove where a circuit is already available; an insert that needs a liner, an outside-air kit, or a new circuit stretches longer. On paperwork, a new solid-fuel appliance triggers a permit and final inspection in most jurisdictions, and that documentation is exactly what your homeowner's insurance will lean on if a claim ever comes.

Tract builders in the sixties and seventies often finished chimney tops with a thin smear of mortar instead of a poured concrete crown. Mortar isn't built for that job — it cracks, holds water, and lets freeze-thaw pry the top courses loose. We cast a proper crown with an overhang and drip edge so water sheds past the brick instead of into it. It's the single most common repair we do in Arlington.

Plenty do, some don't. Mid-sixties flues used clay tile, which holds up well unless the tiles cracked or the joints between them eroded — both common after decades of freeze-thaw. A camera inspection settles it in twenty minutes. If the tile's intact, you're done. If not, options range from resurfacing the joints to a stainless liner, and we price both against what the pictures actually show.

Usually, yes. An old cast-iron damper rusted open pulls your heated air up the flue all winter, and one rusted shut makes the fireplace unusable. On most ranch-era chimneys we install a top-sealing damper at the flue exit instead of fighting the original — it doubles as a cap, seals tighter than the factory part ever did, and costs less than people expect.

Yes — our crews cover Arlington's 17 ZIP codes across Tarrant County, including Pantego, Dalworthington Gardens, Viridian, plus the surrounding communities.

We offer same-week scheduling across Arlington, booked by a real person in under two minutes, 7 AM to midnight every day.

Arlington's mid-century brick ranches and the newer Viridian master-planned community sit squarely between Dallas and Fort Worth, so the inspection covers both year-round: freeze-thaw crown cracking is verified on the older stock and prefab cap condition is documented on the newer builds. Pellet Stove Installation is part of keeping that local housing stock safe, efficient, and up to code.

Pellet Stove Installation in Arlington starts from $1,650, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (214) 444-8103 for a free, no-pressure Arlington quote.

Yes — we run same-week and emergency pellet stove installation across Arlington, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (214) 444-8103 and we prioritize Arlington dispatch so a craftsman is on it fast.

Our Arlington crew lives in and works the metro across Tarrant County, including Pantego, Dalworthington Gardens, Viridian — a certified, local pellet stove installation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (214) 444-8103.