Chimney Services in Austin, TX
Serving Austin (975k residents) and surrounding neighborhoods with same-week scheduling. CSIA-certified, fully insured, written quotes always.
What Austin chimneys actually deal with.
Austin's older chimneys are a mixed crew. Hyde Park and the central neighborhoods hold soft pink Butler brick fired from Colorado River clay; Clarksville and the west side lean on limestone; the postwar rings run to harder commercial brick. Each one weathers differently, and each one takes a different repair. What they share is the climate: long stretches of hundred-degree heat that bake crowns until they check and crack, then the occasional ice week — 2021, then again in 2023 — that drives water into every crack the summer opened. That whiplash is harder on masonry than a steady northern winter, because nothing here was ever built expecting ice. Add Austin's renovation churn and you get our least favorite discovery: chimneys painted or rendered over during a flip, sealing moisture inside brick that then quietly spalls its faces off. We'll be honest about the awkward part — painted brick photographs beautifully, and telling people their paint job is hurting the masonry isn't fun. We do it anyway, in writing, with pictures of what we found. Whether it's repointing Butler brick with mortar soft enough to respect it or recasting a sun-cracked crown, the work in Austin comes down to matching material to material and letting the chimney breathe.
Austin sits in Travis County within the Greater Austin — every job runs the same NFPA 211 inspection protocol, with a written, line-item quote before any work begins.
Pick a service to get started in Austin.
100 services available in Austin — every job starts with a free CSIA inspection and a written, line-item quote before any work begins.
From $16960–90 minChimney Sweep
Creosote graded to NFPA 211 Stage 1–3, then swept clean and documented with photos.
From $10930–120 minChimney Inspection
A graded NFPA 211 Level 1, 2, or 3 inspection with a documented photo report.
From $3001–2 hoursChimney Cap
Flue termination measured, then a stainless or copper cap fitted to NFPA 211.
From $2,9001 dayChimney Liner
CCTV-confirmed liner failure relined with a UL-1777 stainless system, then re-scanned.
From $9251–3 daysChimney Restoration
A Level-2 inspection scopes the failures; crown, masonry, cap, and flashing rebuilt to code.
From $3502–4 hoursChimney Crown
Cracked crown documented as a leak source, then rebuilt with slope, overhang, and an expansion gap.
From $3503–5 hoursChimney Waterproofing
Crown and flashing inspected first, then a breathable vapor-permeable sealant applied to spec.
From $4002–4 hoursThroat Damper Replacement
A cracked or burned-out throat damper cut out of the smoke shelf and replaced with a new frame and plate.
From $2,3001–2 daysFireplace Services
Wood, gas, or electric — installed and serviced to the appliance listing, then commissioned.
From $8001 daySmoke Chamber Restoration
Open joints and exposed corbeling re-parged to a smooth NFPA 211 surface, documented.
From $5252–4 hoursDeep Chimney Cleaning (PCR)
Stage-3 glaze confirmed by inspection, removed by rotary tooling or PCR, then CCTV-verified clear.
From $7501–2 daysChimney Tuckpointing
Failed joints identified by inspection, ground out, and repacked to depth with matched type-S or type-N.
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Local chimney service across Austin
Our CSIA-certified crews cover Austin’s 60 ZIP codes throughout Travis County — from historic masonry to modern factory-built fireboxes. Neighborhoods we regularly work in include:
A crew built to serve Austin.
Your Austin work is handled by CSIA-certified, fully-insured technicians who know the failure modes common to Austin’s housing stock and Travis County's permitting process. Every job is photographed start to finish, with a written quote before any work begins.
Seasonal maintenance for Austin homeowners
Texas weather is hard on chimneys. Here’s what we tell every Austin homeowner to stay ahead of.
Prep for Central Texas hard freezes
Rare but severe freezes (like February 2021) crack crowns and stress masonry. A fall certified inspection grades those weak spots before a deep freeze splits them into documented water-entry defects.
Check prefab caps and chase covers yearly
Most Hill Country new-build uses factory fireboxes. UV and weather degrade caps and chase covers — a yearly inspection catches the leaks and rust while they're still a small finding.
Reline cracked clay flues in older masonry
Historic San Antonio and Hill Country homes often have cracked or undersized clay liners that read fine from below. A Level 2 camera scan — the standard for grading a liner — finds the damage before it becomes a fire risk.
Spark-arrestor service for acreage homes
Wide-lot and ranch properties with wood-burning hearths need correctly-sized spark arrestors and on-schedule creosote sweeps to satisfy rural fire code and pass a safety inspection.
Nearby cities in Travis County
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line